Search in MDM

Bulletin

Po 116 Jetta Code 2003 Help

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
13 years 6 months before #28760 by manual-mecanica
Manual-Mecanica Response on the topic Re: Code Po 116 Jetta 2003 Help
That such a friend is important that checks if the thermostat cooling system still has since they are sometimes eliminated, if you do not have it you have to install it

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
13 years 6 months before #28763 by manual-mecanica
Manual-Mecanica Response on the topic Re: Code Po 116 Jetta 2003 Help

Geemoreno77 wrote: Thank you friends, I will test the data that indicates me, and I will notify you what happened, and if there was a need to change the sensor, and if the Chek Engine is erased .... Thank you in advance .....



Gemoreno77, I will be waiting for us to let the results know. In some cases the check Engine is not erased until the scanner is used

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
13 years 6 months before #28767 by manual-mecanica
Manual-Mecanica Response on the topic Re: Code Po 116 Jetta 2003 Help
You have a problem with the temperature sensor, now you must present some symptoms.

The normal operating temperature is 90 ° C, there are occasions in which your needle is at 90 ° C and suddenly lowers the temperature and then rises little by little ????? Make it noticed ???
Does your car have antifreeze or water? These types of engines have a special antifreeze called G12. Most likely, your sensor does not work ...;) replace it, it is not expensive and once put the antifreeze you should carry.

Please connect or create account to join the conversation.