在MDM中进行搜索

公告

ECU

  • 手动 - 梅纳卡
  • 作者
  • 离线
  • 新寄宿生
  • 新寄宿生
更远
16岁7个月 #5647 通过手动 - 梅纳卡
ECUS手动 - 麦加尼卡
您好,我在标致306 1.6i汽油中遇到了问题,我已经更改了废纸的计算器,因为我随身携带的那个使我失败了(例如,绘画中的拉动和稀有的东西,例如,它只是将部分帐户量衡剂放在零中),我可以将汽车启动,我可以用来启动汽车,我可以将其编码为了它,我可以将其编码为它,或者我可以使用它来代替它。一切顺利。

连接创建帐户加入对话。

  • 手动 - 梅纳卡
  • 作者
  • 离线
  • 新寄宿生
  • 新寄宿生
更远
16岁7个月 #5649 通过手动 - 梅纳卡
关于该主题的手册 - 核心响应回复:ECU
Hi Edute, Mira Peugeot is a slightly complicated brand, I do not advise the change of ECU in any case and less for Ecu de Desguesses, now in any case you will have to take the vehicle to a workshop where you have a Escnner to be able to save the problem, both of the Biejo and the new computer and if you want I am interested in what was your original problem with the old ECU, when buying in them you have to be very careful because there are vehicles that are the same model of the same year and everything but the ECUs work with different systems, the case is given a lot, but for your tranquility a good scanner, not necessarily that of the house, can erase the codes of the ECU and the vehicle will work correctly, I tell you because I repair a Peugeot 307. The problem of this vehicle was that I did not raise speed and shit, an irregular relief and pulls in the walk, in addition the instruments went crazy and the car tended to stop或加速,当我将这辆车放在扫描仪上时,我将我扔了,就像10个错误代码,切割器,质量短的线圈,EGR阀,TPS等,删除记忆并提供记忆,它永远不会失败,它永远不会失败。例如,我向智利比索收取约20,000至25,000次的费用。开处方计算机的眼睛与删除故障代码不同。

连接创建帐户加入对话。

  • 手动 - 梅纳卡
  • 作者
  • 离线
  • 新寄宿生
  • 新寄宿生
更远
16岁7个月 #5656 通过手动 - 梅纳卡
关于该主题的手册 - 核心响应回复:ECU
我完全同意kikemec的观点,您不应该在不知道问题罪犯的情况下更改ECU,而是一个人,一个人不会去药房购买着色药,以防万一有任何好处,我首先向我保证我会发生什么,然后采取行动,因为这是一样的。

首先,当一个人更改ECU时,无论原因如何,您都必须配置键,因为反式键模块与以前的模块不符。这项工作很容易在标致中进行,因为并非所有具有诊断机器的研讨会都可以访问钥匙。

另一方面,您还必须对诊断进行诊断,以查看您是否有其他汽车的古老断层代码或新的记忆(这就是为什么汽车可能会出错的原因)。如果您有任何故障代码,则必须继续访问,身份证明,维修并删除。

因此,配电板很容易获得一些昂贵的价格,并且与原始汽车的ECU一起去车间来查看汽车会发生什么,这是更有利可图的。

一切顺利。

连接创建帐户加入对话。

  • 手动 - 梅纳卡
  • 作者
  • 离线
  • 新寄宿生
  • 新寄宿生
更远
16岁7个月 #5681 通过手动 - 梅纳卡
关于该主题的手册 - 核心响应回复:ECU
非常感谢Kikemec和Megabeat 1,我必须把我放在论坛上,我已经将汽车带到了一个研讨会上,我认为这在这种类型的缺点中将是最好的。谢谢。

连接创建帐户加入对话。

  • 手动 - 梅纳卡
  • 作者
  • 离线
  • 新寄宿生
  • 新寄宿生
更远
16岁7个月 #5740 通过手动 - 梅纳卡
关于该主题的手册 - 核心响应回复:ECU
我同意,在99%的情况下,ECU没有破坏,这是很少的,因此,另一方面,拉力将不得不寻找它,此外,如果您更改了ECU,则必须对其进行编码。听我说火花塞和电缆,温度传感器和坏管破裂,但是因为您说您在电缆或点火线圈中遇到问题,请使用。

连接创建帐户加入对话。