在MDM中进行搜索

公告

福特4.2 LTS的问题。

  • 手动 - 梅纳卡
  • 作者
  • 离线
  • 新寄宿生
  • 新寄宿生
更远
14年1个月 #24540 通过手动 - 梅纳卡
福特4.2 LTS的问题。手动 - 梅纳卡 发表
Greetings friends, I have a problem with a Ford 150 4.2 Lts V-6 truck, this vehicle has the problem that it does not stand to accelerate, as if it lacked pressure to the gasoline pump but this one is (40-45 pounds of pressure), it does not unbrings or endures when walking as if it were upholstered the tasting but it does not bring, I made tuning, lave laborators in laboratory and work very well, they work in the 实验室。喷油器中的脉动运行良好,占据扫描仪,没有投掷任何故障代码,并且在造成故障的情况下不会打开检查引擎的光线,该车辆停止时,急速加速时它达到了3000 rpm,因为它不符合Unphal的感谢...

连接创建帐户加入对话。

  • 手动 - 梅纳卡
  • 作者
  • 离线
  • 新寄宿生
  • 新寄宿生
更远
14年1个月 #24545 通过手动 - 梅纳卡
手动 - 麦内卡对RE :福特4.2 LT的问题。
您好,

您可以检查MAF传感器信号,因为电动机负载传感器,另一件事将是TPS传感器,如果加速加速时它不超出范围,它不会向ECU表示完全开放的加速蝴蝶,但部分是部分。

连接创建帐户加入对话。

  • 手动 - 梅纳卡
  • 作者
  • 离线
  • 新寄宿生
  • 新寄宿生
更远
14年1个月 #24630 通过手动 - 梅纳卡
手动 - 麦内卡对RE :福特4.2 LT的问题。
问候朋友,这辆车的问题是,曲轴上的楔子遭受了磨损,曲轴皮带轮是从时间开始运行的,而雪茄症状症状失去了进度,我解除了分配以恢复链条,在那里我意识到了问题,我已经改变了楔子和皮带轮,并且是那些支持我问题的人,所以我已经消失了。

连接创建帐户加入对话。