YAMAHA VIRAGO 250 XV

Hello people as they are, by carelessness since recently I have my Yamaha Virago 250, it has consumed me oil within normal, but since I did not know that I had to fix I stayed with little oil more or less 600 cm3 and it carries 1400cm, I take out the oil and add new at the level. The question that starts from first, does not smoke, but makes a chillido to metal up as if it were in the cylinder could be? Thanks and cordial greetings.

Very good, if you did not make that noise before, it rule out that it is something external (some screw or loose lid), check the oil level well and if in the appropriate one, observe if the oil light is turned on when it is running, if you do not try to put a little oil through the hole of the spark plug (little he) to make an extra lubrication, it will smoke to you at the beginning, but a squeak can be Majo

Thank you for responding, the oil level is fine after the chillid Cylinders I have to loosen the time chain and get the gear that is in sight to take the lid. You can get the information or tell me where to lower it from the Internet, because I do not get that material where I have searched or video of how a Yamaha Virago 250 engine is removed
.

This is the info that I have of your motorcycle.


I hope it is helpful.
Here I leave you the biggest file and better resolution.
Rapidshare.com/files/2861301027/yamaha.rar