Titilea oil light

Hey proves the bulb connector well or make a direct battery circulation, Suertete

Pimero put a manometro and check the oil pressure. yes that's fine. You can put the cable to the ground The light must be turned on thus decaring the installation. If this is changing the pear, it doesn't cost much. pro the most important to check the pressure. And looking at what moments comes on if it is when the engine gets out of turns careful because it may be a lack of pressure, if it is in the laughs, it can be turned on can be a bad contact or a peeled cable that is put to the ground momentarily, but as a personal advice I first change the pear (sensor) and if the problem persists review what I will see before ...

Check all the electrical installation of the car change all the chips and connectors. And nothing happens the problem remains the same. Catalysts all in order the excellent oil pressure. Disarma the board and remove the lamp into the oil light. Holy Remedy. Thank you all for answering.

If it is a Volkwagen Polo Diesel, try to change the bulb that is at the tip of the injection pump head (it is between the exit of the pipes of the injectors) it handles the turn the account in ElGunos. When he does not stand the oil of the oil and shake put the connectors of the bulbs to mass you will notice that the problem follows I had this problem with one.