在MDM中进行搜索

公告

Tsurullll失败

  • 手动 - 梅纳卡
  • 作者
  • 离线
  • 新寄宿生
  • 新寄宿生
更远
15年前4个月 #13386 通过手动 - 梅纳卡
tsurulll的失败手动 - 梅纳尼卡 发布
帮助我从我的tsuru那里得到错

连接创建帐户加入对话。

  • 手动 - 梅纳卡
  • 作者
  • 离线
  • 新寄宿生
  • 新寄宿生
更远
15年前4个月 #13392 通过手动 - 梅纳卡
手册 - 麦内卡回答回复:tsurullll失败
您的公司您好,

我是Alonso Cruz de Huatabampo Sonora Mexico,我们需要的是更多的详细信息,因为它可能不会使分销商及时及时其他没有线圈火花,

但是请检查线圈是火花,但要注意您没有给您有用的电气放电。

如何按时将发动机放置

好 1.将活塞#1绑在上方,您

必须

听到

打击2 。您发布了它,我们会看到

连接创建帐户加入对话。

  • 手动 - 梅纳卡
  • 作者
  • 离线
  • 新寄宿生
  • 新寄宿生
更远
15年前4个月 #13466 通过手动 - 梅纳卡
手册 - 麦内卡回答回复:tsurullll失败
Thanks Alonso and check the time and the current and everything works as a hect if I disconnect the feeding of the pump to slab injectors with many problems starts logical when the gas is finished in the ratist 1 minute approx the problem is turned off is that the entry of gas to the piston is not controlled to the piston already changed until the module because with a Scaner they told me that it was and the truth is still the same and I have the truth and the truth is the truth.虽然我希望能帮助某人,但我保证您要寻找坚果雪。谢谢,我们正在等待

连接创建帐户加入对话。

  • 手动 - 梅纳卡
  • 作者
  • 离线
  • 新寄宿生
  • 新寄宿生
更远
15年前3个月 #13472 通过手动 - 梅纳卡
手册 - 麦内卡回答回复:tsurullll失败
您好,我是一个Asknse,您
已经审查了您淹没的喷油器系统的压力调节器,您会更改注射器,这是您不向您解释,这是我不理解

连接创建帐户加入对话。

  • 手动 - 梅纳卡
  • 作者
  • 离线
  • 新寄宿生
  • 新寄宿生
更远
15年前3个月 #13493 通过手动 - 梅纳卡
手册 - 麦内卡回答回复:tsurullll失败
That Honda Alonso already checked that and the injectors already changed them, I tell you the whole problem I stole my car and half devalued it recovered it but the distributor was missing and the battery that as soon as the engine to make it to walk I got a distributor and a battery from that when handling it just walking only, so much so that even by the multiple of exhaust you pull gas and I do not start On time, check injectors etc. They put a Scaner and told me that the module or计算机损坏了,更换它将正常工作,我得到了另一个模块,但仍会造成相同的故障。我希望通过这一解释,全景的失败将更多地澄清。预先感谢并度过美好的一天

连接创建帐户加入对话。