福特风星

Greetings to all, I have a Ford Windstar 99, which did not turn on the foci of the board (only the rooms) disarms to revive and had a molten focus but when assembling it they still do not turn on and the meters no longer works (velocimeter, tacometer, temperature, gasoline, horometro) looking for information but there is only Windstar 2001 and the connectors do not correspond.
如果有人有任何信息，或者我给我北方解决它。

事先谢谢你。

我不知道那辆车很好，因为这里没有出售。我将首先检查保险丝，然后如果它具有电位计以降低绘画的灯光强度（桥梁以检查电位计）。由于指示器不再工作，如果保险丝良好，请检查指示器框的连接器，如果连接良好。问候。

在方向盘的下部，它带有一个轻松的盒子，请检查一个说仪器面板的盒子，如果很好，请检查灯光的开关。

问候，感谢您的回答。

已经检查了保险丝和swhaces。 Dismara板板，其中有两张电子卡，发现两个损坏的元素（燃烧）元素，但看不到数据我放置了一个电压调节器，已经在聚光灯下转移了，但不要熄灭，但我认为这是SCR或晶体管。他们会有董事会的示意图吗？

Do not rely on the connectors, you already have two problems are simple if you pay attention, your rooms get a constant negative, when putting Czech rooms that the positive arrives and if it does not reach it it is your swicht of lights now to your devices three cables reach each one, a constant negative, a signal and a positive when opening the swicht if Czech fuse does not arrive, and if not, it is your body control.