Toyota Hilux 2kd Common Ril

I have a problem. I'm an electrician, and this is the issue: A Toyota 2KD common rail engine was repaired and arrived at the mechanic's shop running. They replaced everything as part of a repair, but now all the connectors are connected, and it won't idle. It starts and then immediately shuts off. We tested it with a scanner, and it showed a crankshaft sensor error. We replaced the sensor, but nothing changed. I also replaced the injector driver, and the problem persists. Now, the injectors are receiving more than 50 volts instead of 5 volts. I need your help, please

That's super weird, I've never had a case like this before, haha. I'd check the alternator and voltage regulator to start

Hello look, I recommend you occupy an original Toyota SCAner and reconfigure the injectors possibly the raid changed their position so that the delvehicula computer affinates the injection and the remedies ...