Search in MDM

Bulletin

Meriva 2004

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
14 years 10 months before #15668 by manual-mecanica
Meriva 2004 published by Manual-Mecanica
That I have a problem with a 2004 meriva, in the morning the speeds do not enter are very hard, but after 20 minutes work very well all day the problem occurs in the morning when it is cold, the bomb and the clutch are already moved and the clutch continues and continues to present the same failure, if someone has any idea that it may be appreciated beforehand. GREETINGS

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
14 years 10 months before #15673 by manual-mecanica
Manual-Mecanica Response on the Re: Meriva 2004
Check the oil level of the box and I can't think of anything other than the clutch mace that have little strength the docks

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
14 years 10 months before #15677 by manual-mecanica
Manual-Mecanica Response on the Re: Meriva 2004
The prolema you have it on the cluth album if it is mechanical, if it is automatic, check the oil pressure valves

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
14 years 10 months before #15683 by manual-mecanica
Manual-Mecanica Response on the Re: Meriva 2004
Check the oil viscity, it must be the one that marks the manufacturer, a high viscocity puts the cold speeds hard since the oil is very thick

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
14 years 10 months before #15689 by manual-mecanica
Manual-Mecanica Response on the Re: Meriva 2004
I think the same as automotive I think it goes through the subject with the oil and its viscocity since it is hot and is Ally where it works well, you want is very old or very dirty. Change it you don't lose anything.

Please connect or create account to join the conversation.