FUSIBLE A/C SEAT CORDOBA 1900 TDI 2003 melts.

Hello before, to thank you for this magnificent website
. Habitual turbine and when I disconnect the turbine does not heat up. If anyone knows about the subject I would appreciate your help.

Sad

A bad contact can make a cable overheating, a fuse and that the electro engine is overheating, also a very small step of the current such as putting a too small fuse can heat the cable and the portfusible portfusable for the strength to the passage of the current for the consumption there is. Put the fuse that corresponds and also measures the resistance of the cable that goes from the fuse to the electro in case it was half burned, not also forget the negative cable to mass its resistance and connection that is well tight.

It can also be an overexertion of the electric motor, (I suppose you refer to the habitaculus fan) put that for example you had the filter of the habitaculus very saturated with dirt and this has not been changed in a long time ...

Dear friend, measure the resistance of the energy driving line for the electric fan fuse, there is the possibility of driver that offers a high degree of resistance that causes overheating due to aging, remember that the weakest link is what always breaks.