Search in MDM

Bulletin

Cavalier 97

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
12 years 10 months before #36705 by manual-mecanica
CAVALIER 97 Published by Manual-Mecanica
Hello, the entire mechanical manuals community turns out that the cavalier 97 Machine 2.2 4 cylinders starts a read that the letter says anti -theft block remove the march and check it and if it works it I install it from Nuebo and nor Klic does the nadamas do the pump that works and then I cut I have a week that I cannot throw it I would like I would like someone I could help me, I porf me.

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
12 years 10 months before #36707 by manual-mecanica
Manual-Mecanica Answer on Cavalier 97
Czech that is the correct ignition key if it is k has a chip ... also Czech k has no alarm

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
12 years 10 months before #36709 by manual-mecanica
Manual-Mecanica Answer on Cavalier 97
Friend usually cuts currents go on the sheet in the cable that goes to the starter engine, you can make a bridge taking out the stream that makes the current cut

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
12 years 10 months before #36716 by manual-mecanica
Manual-Mecanica Answer on Cavalier 97
The anti -theft lock is when it does not detect the chip in the key, to check that this ai, or the engine will turn but do not open ignition or injection

Please connect or create account to join the conversation.