Distribuc Correa Putting Brands

Know the tuning at Taunus 80

The reference is very good, but I think you should put the cam in crouse and piston 1 and 4 in running top and there it should be crouse for the one or for the four you understand me or not?
or if not, how are you going to put the distributor?

Take out the spark plugs, put them tapancitos made with cork, it was not too tight but stagnant-
that a friend turns the engine very slowly so that the corks are jumping.
Cork that Salta tells you that at that time, that piston is on compression and explosion.
With this you will also realize the order of ignition.
When the cork of the No. 1 jumps, the cathode of the distributor, must be pointing to the electrode of the spark plug No.
1

Leave
it
ready .​

Thanks Hector I understood it and I have started

Thanks Marito very good technique to know and I started it was easy