Thanks for downloading marches with display
If the download does not start automatically after a few seconds, click the Download Link

Display march counter

Sent on: Jun 13 2009
File size: 334.69 kb
Downloads: 792
File version: 1.0
Author of the file: Zian

How to make a circuit for a marcas counter with a display.

File classification (0/0)
Connect to vote
Observations: 36
Manual-Mecanica 8 Years AUG
Thank you so much
Manual-Mecanica 10 Years AUG
Thank you so much. Let's see what I get with this.
Manual-Mecanica 12 Years AUG
excellent
Manual-Mecanica 13 Years AUG
This is good, thank you
Manual-Mecanica 14 Years AUG
German Camacho is very beautiful The project can be used as amendments on the board thank you very much
Manual-Mecanica 14 Years AUG
q bn I will try, thanks
Manual-Mecanica 14 Years AUG
The circuit looks very interesting I will try it.
Manual-Mecanica 14 Years AUG
Thanks for the contribution, I will rehearse it. I find it interesting.
Manual-Mecanica 14 Years AUG
I could open it perfectly without problems.
Greetings and thanks for the contribution
Manual-Mecanica 14 Years AUG
You can't open the document, it tells me that the PDF cannot be opened
Manual-Mecanica 14 Years AUG
thank you
Manual-Mecanica 14 Years AUG
Não managed to open or no format (MS9)
Manual-Mecanica 14 Years AUG
Very interesting I made one inside the change lever but without integrated circuit it really screwed it is to put the censors as there says in the empt of the lever and that the system is properly works for this system for a truck or a bugui but when you want to put an astra I swear you will complicate a lot, it is best to take out the box and bring the holes with the censors and place the censors and place the censors in So ise and is Barbaro ..
Manual-Mecanica 14 Years AUG
Thank you very much for the scheme, interesting and easy. Greetings.
Manual-Mecanica 14 Years AUG
The accountant is very good, only suitable for electronic.
Greetings.
Manual-Mecanica 14 Years AUG
excellent!!!! I am going to try it very good
Manual-Mecanica 14 Years AUG
very good...
Manual-Mecanica 15 Years AUG
Boy is a pass, that's how it is glad
Manual-Mecanica 15 Years AUG
Thank you very much, I'm going to see if I get ...
Manual-Mecanica 15 Years AUG
Thank you very much, I will apply it on my Nissan Truck.
Manual-Mecanica 15 Years AUG
Thank you, very interesting, I will study it and apply it.
Manual-Mecanica 15 Years AUG
testing
Manual-Mecanica 15 Years AUG
It is a good support of IC ... The 5 volts you get them with a 7805, or with a 5.1 volts in reverse, for the most recommended case the second for the low consumption pens.
Manual-Mecanica 15 Years AUG
Good idea I will try
Manual-Mecanica 15 Years AUG
I can't open it, file not admitted or damaged
Manual-Mecanica 15 Years AUG
Very interesting always wonder how it was done, thanks
Manual-Mecanica 15 Years AUG
Very good, although in the scheme you have marked the stroke of the march R to 1 instead of a mass.
In addition I would suggest that you added how to get the 5 VCC in the car for who does not have much electronics idea.
Thanks for sharing it.
Manual-Mecanica 15 Years AUG
Good idea
Manual-Mecanica 15 Years AUG
Thank you very much Uncle, I will be in my car soon
Manual-Mecanica 16 Years AUG
It's very good thanks
Manual-Mecanica 16 Years AUG
Thank you!
Manual-Mecanica 16 Years AUG
Excellent guide ... Thank you
Manual-Mecanica 16 Years AUG
If you know electronics you do it but I don't believe but the idea is good
Manual-Mecanica 16 Years AUG
A good very good idea
Manual-Mecanica 16 Years AUG
VERY GOOD. I'm going to try tks
Manual-Mecanica 16 Years AUG
Interesting, thanks