Hello, I have a 2003 Chevrolet Corsa, sometimes I do not start check the starting MTOR and change the bushings, I also check the solenoid, it was well we put together it and continued starting in normal way but after a few days it failed again, left it like this and came to push it and so it started, well then change the battery, check the sheet and remain the same.
I was reading something about it in the forum but the solution would be on the EPROM card, in my case I do not think that is that normally everything works well (the fault is presented of the sgte. Form, when turning the key when it must start, it behaves as if the load of the battery was very little, and it is not able to move the engine)
but the other day I went to make a process to the bank, I went to the bank; When I returned after 15 min. I fail, 2 attempts and I went for a walk, I turned around half an hour and started without problems.
It would be ideal for me that someone who had the same drama indicated how I solve it.
Thanks in advance.