Automatic tensioner

I changed the band and there was no problem but then to remove the alternator they removed the band, another mechanic and now it has a noise to the automatic tensioner as if it were a rattle, which would happen there. You can help me. thank you

Friend depends on the automatic tensioner if it is Peugeot, or Ford, plus its operation is the same, you must have in Cueta that it is returned to a great speed when they release it and usually beate That it is generating noise, test and let us know, if it really is the tensioner is changed and now, but not to buy spare parts to buy is better to check.

Thank you. Kikemec, already check the pulleys and turned them and what I observe is that little but repeated noise of the tensioner (low and rises very slightly and very fast). Now, it can happen if I use it and I ignore this, something else can be found and the other components (water pump, alternator, air conditioning, etc.) would work well.

If everything worked well until the strap is cut or left, or you never want anything, anyway if the belt is cut you will run out of hydraulic direction, without an alternator load and without water pump, you will realize obio and stop, but more than that it is not.

Well I have seen cases where the strap is cut and lodged in the Damper, so they have done as wedge and the teeth of the distribution strap are passed, well, also walking with that noise is unpleasant, the option to change before you are a major failure is always more attractive, preventing it better than healing, hahaha greetings