Mechanics manuals all about mechanics and technological news.

Search in MDM

Bulletin

compression

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

13 years 8 months before #26175 by manual-mecanica

Compression Published by Manual-Mecanica

good I just acquire a compression meter .. I would like to know what steps to do a correct measurement .. and if they know what should be the compression of an eclipse 92 4G63 2.0 engine thanks

Please connect or create account to join the conversation.

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

13 years 8 months before #26247 by manual-mecanica

Manual-Mecanica Response on the Re: Compression

Hello, you will see the realption is
1: 9.0 this is the right greetings

Please connect or create account to join the conversation.

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

13 years 8 months before #26265 by manual-mecanica

Manual-Mecanica Response on the Re: Compression

Disconnect the ignition, remove a spark plug or injury, and by the hole put the compresimeter and drive the start until I read you. I hope I have helped you.

Please connect or create account to join the conversation.

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

13 years 8 months before #26266 by manual-mecanica

Manual-Mecanica Response on the Re: Compression

I forget, I will make you the compression reading of each cylinder, one by one.

Please connect or create account to join the conversation.

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

13 years 8 months before #26276 by manual-mecanica

Manual-Mecanica Response on the Re: Compression

9.6 bar with the accelerator to the maximum and with the indications of Eldevictrus Luck!

Please connect or create account to join the conversation.

Thanks to Kunena Forum