Adapt 4G54 Motor to Montero from 1999

I have a mountain of the year 1985 with a 4G54 engine with the bodybuilder quite damaged, and buy a body of a 1999 Montero, so I would like to tangle this engine to the body. I would like to know if someone did this before, problems and suggestions, thanks

I have adapted several engines that specific, but if you have tracera tracion in both you will not have the cardan, you only be careful you will have to adapt the motor supports, it is not complicated, but notice that when you adapt the engine you will be easy to remove the oil filter and the starter engine, so as not to have future problems, another thing to take into account is the case if you do not go to any side. You will have to adapt it, it is cut and lucky.

In fact, the two are rear traction, now looking at the transmission housing screws are different from the engine, but they told me that a piece can be made between the engine and the transmission, the bases do not worry me because it is weld I'm going to make Dishc piece, thank you

In fact it is sent to make a flanch to adapt the cardan and any turner is no longer complicated