4T40E box

I have problems with the Z24 box the 4T40E advances without force both in progress and in reverse at first made the changes but then I present the fault and I do not improve. It has a noise very similar to the one the chain does

If you have not done any repair or the filter is tapo or a piece has been damaged so that it produces noise, but the noise when the filter is covered is very peculiar because it is like buzzing, as when you need hydraulic in the Power Esteing. You have to give more information if it was after a repair the fault, and if you already took the carter I say, as is the sediment you find.

Actually it is a box that is bought from importer only the filter is changed to mount it and when uncovering the crankcase the oil was with very little sediment and the noise is not like a buzzing rather it is something metallic, it does not make the changes, and does not advance in reverse and forward it does so without force

Pedi guarantee may have been rebuilt, if it has been working, it cannot be damaged so fast, it must be rebuilt or it was a vehicle that choco and stays without oil only so it can be damaged. Because they were very careful when riding it, that they would not enter forced? Because if it cost you to close the box you can have broken the pump because it was not well involved in converter.

It is that in this case the pump goes back not in the converter .. rather it seems logical that they find it without oil. Thanks ..! 1