Putting of 306 16 V

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

13 years 11 months before #23662 by manual-mecanica

Putting the 306 16 V published by Manual-Mecanica

Hello friends, I have a problem with my 306, I broke the distribution strap and I do not find the marks to synchronize the gears. If someone could tell me how this model of 16 valves is made, or where to get a scheme or diagram, I will be grateful. Greetings. Miguel

Please connect or create account to join the conversation.

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

13 years 11 months before #23704 by manual-mecanica

Manual-Mecanica Response on the subject Re: Putted to 306 16 V

If I remember correct you need special draft tools, but it seems to me that this Peugeot has behind the pulleys some holes where you can cross some bolts 10 both in the crankshaft pulley and in the camshaft, eye this Peugeot coves the belt with the pistons in half not in pms and the cams in admission and escape

Please connect or create account to join the conversation.

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

13 years 11 months before #23813 by manual-mecanica

Manual-Mecanica Response on the subject Re: Putted to 306 16 V

Thank you Kikemec, you were right, 306 is tuned with bolts that set the engravings to the lid and block. Thanks to your message is already underway. A hug. Miguel

Please connect or create account to join the conversation.