Search in MDM

Bulletin

Honda CRV2.2ivtec

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
13 years 11 months before #23028 by manual-mecanica
Manual-Mecanica Response on the Re: Honda CRV2.2ivtec
The CR -V 2007 valve light is 23ADM 27esc -+2 in cold as well as the action with 2.4 engine

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
13 years 11 months before #23029 by manual-mecanica
Manual-Mecanica Response on the Re: Honda CRV2.2ivtec
Hello. But how many km or miles do you have because normal mind are retouched at 80,000km

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
13 years 11 months before #23040 by manual-mecanica
Manual-Mecanica Response on the Re: Honda CRV2.2ivtec
As I always say I give him 20 even, they are fine if there is a lot of noise you give him a little more,

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
13 years 11 months before #23053 by manual-mecanica
Manual-Mecanica Response on the Re: Honda CRV2.2ivtec
Thank you very much, your fact was already helping the whole engine, I lacked only that. Always at your disposal for any consultation. hug

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
13 years 11 months before #23054 by manual-mecanica
Manual-Mecanica Response on the Re: Honda CRV2.2ivtec
Hello, I explain you, the engine was overheated and pistons and cylinders melted, the cylinders had to be directed and manufactured new pistons, I disassembled the lid and I did not realize that the valve spring were of different height. And I did not have the data for it. I already arm it and I am ready to start. Thank you very much for your interest in the subject. I am at your disposal for any consultation you want to do to me. hug

Please connect or create account to join the conversation.