Temperature sensor

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

14 years 2 months before #20750 by manual-mecanica

Temperature sensor published by manual-mecanica

Hello, recently, Micarro (Plymouth Neon 2000) Marco The check Engine Light passed the Scaner and the oxygen sensor came out and the temperature already put the oxygen but I do not know where the temperature is going I can not find someone who can tell me where it is appreciated.

Please connect or create account to join the conversation.

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

14 years 2 months before #20765 by manual-mecanica

Manual-Mecanica Response on the Re: Temperature sensor

It is usually mounted on the butt or in the body of water where the thermostat is, it would be a two cable connector since it is a NTC probe

Please connect or create account to join the conversation.

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

14 years 2 months before #20872 by manual-mecanica

Manual-Mecanica Response on the Re: Temperature sensor

Thank you Kikemec for your prompt response but I already found it stuck to the right side of the engine under the air filter and the battery, but I have a question if they help me as I said I already changed the oxygen sensor and the temperature but the temperature but my car trembles when I turn it cold and does not mark the temperature on the board, although I no longer mark the checkengine that can be badly put badly the sensor ok?

Please connect or create account to join the conversation.

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

14 years 2 months before - 14 years 2 months before #20873 by manual-mecanica

Manual-Mecanica Response on the Re: Temperature sensor

I leave where the sensor is in case someone serves

Latest edition: 14 years 2 months before by .

Please connect or create account to join the conversation.

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

14 years 2 months before #20888 by manual-mecanica

Manual-Mecanica Response on the Re: Temperature sensor

Friend is actually mounted on the butt by the photo that you show, but the sensor is usually not mandated to the board that is another connector that is of a single kisas cable, take it to take it if it does not have the computer does so in the function of the sensor, but the irregular relief and the clock, it gives way to believe that the sensor does not correspond to your model, Czech is well, the other is the same. This correctly done.

Please connect or create account to join the conversation.