Homocinetica de Peugeot 205

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

14 years 3 months before #19559 by manual-mecanica

Homocinetica de Peugeot 205 published by Manual-Mecanica

Hello everyone I am changing the homocinetic of my car Peugeot 205 and I don't know where the valvulina is put, since when the homocinetic old man lost a lot of valvulo.
Thank you already

Please connect or create account to join the conversation.

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

14 years 3 months before #19562 by manual-mecanica

Manual-Mecanica Response on the Re: Homocinetica of Peugeot 205

On the velocity box, seen from above, it is stuck to where the maza cable is a plug that at your time is the discharge of precion, be patience that it is a small hole
if you recovered the fluid aggregate it and ready if you do not have to empty it and put 2.5 liters

Please connect or create account to join the conversation.

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

14 years 3 months before #19565 by manual-mecanica

Manual-Mecanica Response on the Re: Homocinetica of Peugeot 205

Thank you very much bari !!!!!

Please connect or create account to join the conversation.

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

14 years 3 months before #19569 by manual-mecanica

Manual-Mecanica Response on the Re: Homocinetica of Peugeot 205

Good afternoon Antonio. The filling and level screw is next to the 5th lid, it is 19m/m. You remove it and add oil until you start leaving, you put, press and go.
The 5th 5th cover is made of sheet

Please connect or create account to join the conversation.