Search in MDM

Bulletin

Help Chevrolet Luv 96

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
14 years 8 months before #16560 by manual-mecanica
Manual-Mecanica Response on the Re: Help Chevrolet Luv 96
Hello friends, I would like to know if someone has a workshop manual for a Chevrolet Luv or Isuzu KB, my car is of the second generation that had these pick up and it is from 1991, I would like to make an overhaul but I would like to have at least the motor manual, if someone can help I appreciate it. And sorry I know that none of this answers his question. :(

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
10 years 5 months before #48272 by manual-mecanica
Manual-Mecanica Response on the Re: Help Chevrolet Luv 96
EYE LA LUV 96 does not wear crankshaft sensor ... The rotation signs are sent from the distributor ..... Try with a LED light if the injectors have a pulse signal ... Good luck!

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
7 years 6 days before - 7 years 6 days before #53199 by manual-mecanica
Manual-Mecanica Response on the Re: Help Chevrolet Luv 96
Hello andres, your problem is only in the fuel system since by adding you external, the engine splits and is maintained until the fuel ends, which indicates that everything else is in perfect condition. I tell you some time ago I had to see a Chevrolet Luv 2.3 year 1996 with carburetor and mechanical bomb with a similar problem. He added fuel by the carburetor and left the engine until this ended. An electric fuel pump was installed to the fuel line near the engine and the pump outlet a transparent hose to a bottle to see the operation of this and surprise left very little fuel at the beginning after almost a minute is uncovered and a large amount of benzina is very dirty and with sediments it is allowed to work until it comes out clean. Then the exit hose of the electric test to the carburetor and the engine is installed and is being worked without problems is left that way but once in use a few days it stops for dirt again. The definitive solution was to remove the pond and clean it also clean the fuel line hoses and mechanical pump change benzine filter and thoroughly clean the carburetor, after that its operation did not present any more problems.
Last edition: 7 years 6 days before . Reason: Diction

Please connect or create account to join the conversation.