Falla for Couier is voltage on the g pump

Hello everyone, I have a fault with a Ford Couer Motor Zetec 1.6 truck
now the fault begins like this, the engine began throwing exploits as if it were for lack of gasoline when doing that, begins to gather ..
I thought it was the pump changed it a few days after that it worked well until afterwards it only went out as if the current was cut in the coil, check the coil when you make the coil. Spark, after turning off the truck is hard to start, but it after it goes out every 5 or less as it memorizes it
. And complete complete, check theleter that is responsible for making the pump work and heated .......
please help me

Hello, to see if there is no cable by deriving to mass, but you would have a molten fuse ... It can also be due to the PMS collector that is between the block and c

You can try to connect a direct pump cable to El Beel 15 (contact position) of the car key A If you know if it is the installation of the pump that is wrong.

Also what Ismael53 told you, is very right because when the captors fail when the vehicle is heated they usually do strange things.

You already tell us something.

Hello ... the same thing happened to me in a Zetec engine. And it was the PMS collector. When he was heated, he stopped emitting a signal and the calculator stopped the vehicle by cutting the gasoline pump ... I hope it will be useful.
a hug!!!!