Toyota 4.5 liters and 24 valves (1FZ-FE)

Good morning to the forista of this medium I have a dilemma to whom I can attend in my question I have the Land Cruiser Toyota truck year 2002 with the specified engine 1FZ-FE about information regarding that the truck would be more prudent in question, it escapes smoke at the time of being on but in a stop place I mean in a semaphore when starting escape from the escape of oil. To escape smoke, the truck has a mileage of 195000 km the doubt that it would be better to change gums of valves or make a clear engine and buy the original tires a good investment but the dilemma is not to spend powder in Zamuro

Hello; In the first place, it is raising oil and what is essential is to change the valve seals and the oil from now on you decide whether to repair the engine?

Hello before, it would be good to check if you are using the oil specified by the manufacturer or the recommended ekivalent and what not suitable oils produce these failures

Look usually and in the common case that smoke in Toyota engines only goes through valve seals, so I am from the idea that you change and now, now if you want to make an adjustment it is your thing, but I believe for what you say is just change the valve seals, well anyway you will have to take out the cylinder head, so you can see if you can see if the rings pass the rings. And you checked the lucky game.

I agree with the Kike Company